Pharm-A-Line Peristaltic-Pump Tubing
Superior in Peristalic Pump Applications
Manufactured from virgin, medical grade TPE and homogeneously extruded to precise dimensional tolerances, our Pharm-A-Line I tubing was specifically developed to provide superior performance in peristaltic pump applications. Pharm-A-Line I provides an excellent alternative to silicone tubing when resistance to chemicals (such as acetone or methylene chloride) is a concern. Prior to release, we rigorously test each batch of resin for cytotoxicity and heavy metals.
Pharm-A-Line I meets today’s most stringent cytotoxicity and extractability requirements for critical pharmaceutical process applications. It is recommended for most biological process fl uids. Pharm-A-Line I is also ideal for liquid coupler connections between process tanks and fl uidized bed process equipment. Other applications include sterile solutions, buff er agents, and food and beverage processing.
Applications
- Peristaltic pump tubing
- Buffer Solutions
- Solvents
- Metering pumps
- Fluid Bed Feed Systems
- Biological Media
- Filling Machinery
Benefits
- Superior Bio Compatibility
- Excellent chemical resistance
- Extremely Flexible
- Low Particulate Spallation
- Meets most FDA regulatory requirements
Packaging
- Continuous coils
- Pre-cut lengths
- Clean room packaged
- Pump yoke configurations
- Available with Sanitary ends
Sterilization
- Ethylene oxide
- Autoclave
- Gamma
Certifications
- U.S. Pharmacopoeia Class VI
- Cytotoxicity Criteria
- CFR Title 21 Section 177.2600
- Meets 3-A Standards
- Traceability: Lot and Batch
- Certification: Lot and Batch
- Current Good Manufacturing Practices (CGMP)
Additional Data
Specific Gravity (ASTM D792) | 0.970 |
Durometer, Shore A (5SEC.ASTM D2240) | 68 |
Tensile Strength at Break, psi (ASME D-412) | 972 |
Elongation, % (ASTM D-412) | 37 |
Tensile Stress @ 100% Across Flow (73F) (ASTM D-412) | 363 |
Tension Set, % | 8% |
Tear Resistance Lb./in | 128 |
Compression Set Constant Deflection “B” (22hrs. @ 70° C), % | 32 |
Abrasion Resistance, Mg. lost/1,000 cycles | 1.2 |
Brittle Point, °F (ASTM D-789) | -76F |
Low Temp. Flex at -40 | Passed |
Flame Resistance Vertical Plane (Average Burning Rate-cm/min | 22 |
Heat Resistance | 275 |
FDA Reg. No. | 21CFR177.2600 |
Download a printable version of the Pharm-A-Line Datasheet.